Alula RE310P Install Manual

Resolution Compatibles
The Indoor Motion Sensor
or when the external contact is opened. It is battery
powered and requires no installation tools. A Pyroflex
sensor with HighBar
leading pet immunity and catch performance.

Features

• Industry-leading pet immunity and catch performance
• Supports both motion zone and an external contact zone
• Mountable on walls or in corners
• 5 year warranty

Enroll

by placing the panel into wireless enrollment mode and
then sending an enrollment signal from the motion sensor.
The external contact can be enrolled by holding down the
tamper and installing the battery.

Options for sending an Enrollment Signal

• Remove the battery tab and cover to trip
tamper
Install
using the included 3M™ VHB™ tape to adhere the
motion sensor on a wall or in a corner. The tape should
be applied to the back when wall mounting or to the
back bevels when corner mounting. Alternatively, screw
mounting can be done by punching out the screw mounting
holes.

Installation Tips

• Mount 7.5 to 9.5 feet from the floor for an
optimal balance between catch performance
and pet immunity.
• Remove the cover and circuit board before
trying to punch out the screw mounting holes.
• Ensure the bug foam stays intact and snug
around the IR sensing element when re-
installing the circuit board.

External Contact

• Use a normally-closed contact because the
motion sensor will transmit an alarm when it
sees the external contact open.
• Do not use end-of-line resistors.
Use the panel installation guide to verify proper system setup.
RE310P Indoor Motion Sensor
-Pet Immune DSC
alarms when motion is sensed
signal processing allows for industry-
™
Compatible
™
™
Mounting Screw Holes
Ceiling
Floor
Cover-Securing Screw Hole
I