Alula RE210T Install Manual

Alula RE210T Install Manual

Indoor motion sensor-pet immune 2gig compatible

Advertisement

Quick Links

Resolution Compatibles
The Indoor Motion Sensor
or when the external contact is opened. It is battery
powered and requires no installation tools. A Pyroflex
sensor with HighBar
leading pet immunity and catch performance.

Features

• Industry-leading pet immunity and catch performance
• Supports both motion zone and an external contact zone
• Mountable on walls or in corners
• 5 year warranty

Enroll

by placing the panel into wireless enrollment mode
and then sending a sensing event (e.g. tamper, motion, or
external contact trip).

Enrollment Tips

• Power down the sensor after enrollment
because the panel may mistakenly double
enroll the sensor if it is tripped again while you
are walking over to enroll the next sensor.
• Use loop 3 for the external contact. Loop 2 will
NOT work.

Motion Enrollment Panel Questions

• Select RF sensor # (01 to 48)
• Select RF sensor type
• Select RF sensor equip type
• Select RF sensor equip code
• Select RF sensor other equip code*
• Select RF sensor serial number
• Select RF sensor age
• Select RF sensor loop number

External Contact Enrollment Panel Questions

• Select RF sensor # (01 to 48)
• Select RF sensor type
• Select RF sensor equip code
• Select RF sensor other equip code*
• Select RF sensor serial number
• Select RF sensor age
• Select RF sensor loop number
* Option not present in GC3 panel
Verify proper enrollment and operation using your control panel's installation manual.
RE210T Indoor Motion Sensor
-Pet Immune 2GIG
alarms when motion is sensed
signal processing allows for industry-
Compatible
Ceiling
Floor
Select a zone number
[04] Interior Follower
[2] Motion
[0000] Other or [0869] PIR w/Pet Immunity
[0] Other
Press Shift, Press Learn, Trip sensor
[1] New
[1] Motion
Select a zone number
[03] Perimeter
[0000] Other or [0862] Thin door window
[0] Other
Press Shift, Press Learn, Trip sensor
[1] New
[3] Additional Input
I

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RE210T and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Alula RE210T

  • Page 1 RE210T Indoor Motion Sensor -Pet Immune 2GIG Compatible ™ Resolution Compatibles The Indoor Motion Sensor alarms when motion is sensed or when the external contact is opened. It is battery powered and requires no installation tools. A Pyroflex ™ sensor with HighBar signal processing allows for industry- ™...
  • Page 2 Install using the included 3M VHB tape to adhere the motion ® sensor on a wall or in a corner. The tape should be applied Mounting Screw Holes to the back when wall mounting or to the back bevels when corner mounting.
  • Page 3 Pro Tips Pet immunity is optimized when the motion sensor is mounted at 7.5 to 9.5 feet high and aimed away from house features that could allow pets to be high in the detection field (e.g. stairs, counter tops, tall furniture). 7.5ft 3.2ft 10ft...
  • Page 4 Specifications subject to change without notice. WARRANTY FCC NOTICE Alula will replace all non-portable products that are defective in This device complies with Part 15 of the FCC rules. Operation is their first five (5) years. subject to the following two conditions: (1) This device may not cause harmful interference.

Table of Contents