Table of Contents
Advertisement
12
Getting Started
The optional S-Video TV Out connector on your ATI
Graphics Accelerator card can be used to connect to your
TV, VCR, or camcorder. If your TV, VCR, or camcorder
only supports a composite connector, a S-Video-to-
Composite connector can be purchased that allows you
to connect to a device with a composite connector. See
Getting Additional Accessories
Windows
Windows may start the Add New Hardware Wizard to
install the Standard VGA Driver. To correctly install
your new hardware:
Cancel the Wizard if you are using Windows
Windows
CATALYST™ Software Suite
If the Add New Hardware Wizard does not appear,
proceed to
on page 13.
If the Add New Hardware Wizard does appear:
1
Click Next to allow Windows
Standard VGA or Standard PCI Graphics Adapter.
If prompted for the Windows
into your CD-ROM drive.
2
Type the following: D:\<Operating System name> for
example D:\WinME
If D is not your CD-ROM drive, substitute D with the
correct drive letter.
3
Click OK.
4
Click Finish to close the Wizard. The system should
now be restarted.
®
New Hardware Found
®
XP, and proceed to
Installing the CATALYST™ Software Suite
on page 16.
Installing the
on page
13.
®
to search for the
®
CD-ROM, insert it
®
2000 or
Advertisement
Table of Contents
