Advertisement
Quick Links
Advertisement
Related Manuals for ATI Technologies Radeon 9200
Summary of Contents for ATI Technologies Radeon 9200
- Page 1 ATI Radeon 9200 Graphics Card with TV-Out Installation Guide...
- Page 2 The information in this document is subject to change without This document contains proprietary information that is protected by notice. copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language ® Hewlett-Packard Company makes no warranty of any kind with without the prior written consent of HP.
-
Page 3: Table Of Contents
Contents Introduction..........1 Federal Communications Commission Statement ... 2 Installation ...........3 Installing the Card..........3 To Install the Software ........5 Viewing the PC Image on TV ......5 Returning the PC Image to Original Resolution..6 Settings ..........7 ATI Radeon 9200 Graphics Card with TV-Out Installation Guide... -
Page 5: Introduction
Introduction Back of PC Thank you for purchasing ATI Radeon 9200 Graphics Card kit. Composite video cable This graphics card kit contains: These instructions. The ATI Radeon 9200 Graphics Card with Back of PC TV-Out and VGA connectors. The Driver Installation Disc CD with software ®... -
Page 6: Federal Communications Commission Statement
Federal Communications occur in a particular installation. If Commission Statement this equipment does cause harmful interference to radio or television This device complies with FCC Rules Part 15. reception, which can be determined Operation is subject to the following two by turning the equipment off and on, conditions: the user is encouraged to correct the... -
Page 7: Installation
Installation Warning: Electrostatic discharge (ESD) can damage disk drives, add-in cards, Installing the Card and other components. If an ESD station is not available, wear a wrist strap To install the ATI Radeon 9200 Graphics Card, attached to a metal part of the computer. refer to the upgrading documentation included Place cards on a conductive foam pad or with your PC. - Page 8 Follow the instructions in the upgrading documentation included with your PC to insert the graphics card. The card fits only the AGP add-in card slot, which has its connector offset from the other add-in card connectors. See the figure detail. The monitor connects to the 15-pin VGA connector (C) on the graphics card on the back of the PC.
-
Page 9: To Install The Software
To connect the PC to the television (optional): 4 Follow the onscreen directions. 5 When asked to restart, select Yes and click Connect the cable from your TV to either the Finish. graphics card S-Video connector (B) or composite connector (A) on the back of the PC. The TV cable is not included;... -
Page 10: Returning The Pc Image To Original Resolution
6 Click the Advanced button. Note: Turn off the PC before disconnecting the cables. 7 Click the Displays tab. To restore the PC image: 8 Check the upper-left corner of the TV button. 1 Turn off the TV and the PC. A green corner indicates the TV monitor is 2 Disconnect the cable between the PC and active, a red corner indicates the TV monitor... -
Page 11: Settings
Settings The following table is an explanation of each ATI tab that is present after the driver is installed. OpenGL Fine-tunes the settings for OpenGL games Direct 3D Fine-tunes the settings for Direct 3D games Options Provides driver information and card specifications Overlay Configures the brightness,...