Table of Contents
Advertisement
10
Getting Started
NTSC/PAL Support
The RADEON 9800 Series provides both NTSC and
PAL support. NTSC is the TV standard used in North
America. PAL is the TV standard for most of Europe.
i
To change the setting to PAL:
1
Remove the RADEON 9800 Series from your
computer.
2
Locate the orange switch near the fan (see illustration
on page 9).
3
Use a sharp pencil to move slider switch number 1 as
shown in the illustration.
4
Re-install the graphics accelerator card into your
computer.
The default setting for the RADEON 9800 Series is
NTSC. If you live in North America there is no need
to change this setting unless you intend to use PAL
standard equipment (for example, PAL
Camcorder/PAL VCR).
Advertisement
Table of Contents
