Windows New Hardware Found; Installing The Catalyst™ Software Suite - ATI Technologies 9600 - Radeon XT 128 MB DDR Video Adapter Installation And Setup Manual

Windows New Hardware Found

Windows may start the Add New Hardware Wizard to install
the Standard VGA Driver. To correctly install your new
hardware:
If you are using Windows 2000 or Windows XP, Cancel the
Wizard and proceed to
Suite
• If the Add New Hardware Wizard does not appear, proceed
to
• If the Add New Hardware Wizard does appear:
1
2
3
Installing the CATALYST™ Software Suite
ATI's CATALYST software suite provides the ultimate software
required to enjoy the full power of your ALL-IN-WONDER
card. The CATALYST software suite comprises four, distinct
software elements:
• Display driver
• Multimedia Center
• HYDRAVISION (not included in the Express Install)
• Remote Wonder Software
To ensure you install the latest software, use the ATI Installation
CD-ROM that shipped with your ALL-IN-WONDER card.
on page 13.
Installing the CATALYST™ Software Suite
Click Next to allow Windows to search for the Standard
VGA or Standard PCI Graphics Adapter.
If prompted for the Windows CD-ROM, insert it into your
CD-ROM drive.
Type the following: D:\operating system name (for
example, D:\WinME).
If D is not your CD-ROM drive, substitute the correct drive
letter.
Click OK, click Finish to close the Wizard, then restart
your computer.
Installing the Hardware and Software
Installing the CATALYST™ Software
13
on page 13.