Windows® New Hardware Found; Installing The Catalyst™ Software Suite - ATI Technologies ALL-IN-WONDER 9700 Series Installation And Setup User's Manual

14 Installing the Hardware and Software
®
Windows New Hardware Found
Windows may start the Add New Hardware Wizard to install
the Standard VGA Driver. To correctly install your new
hardware:
If you are using Windows
Wizard and proceed to
Suite
• If the Add New Hardware Wizard does not appear, proceed
to
• If the Add New Hardware Wizard does appear:
1
2
3
Installing the CATALYST
ATI's CATALYST software suite provides the ultimate software
required to enjoy the full power of your ALL-IN-WONDER
card. The CATALYST software suite comprises four, distinct
software elements:
• Display driver
• Multimedia Center
• HydraVision (not included in the Express Install)
• Remote Wonder Software
To ensure you install the latest software, use the ATI Installation
CD-ROM that shipped with your ALL-IN-WONDER card.
on page 14.
Installing the CATALYST™ Software Suite
Click Next to allow Windows
VGA or Standard PCI Graphics Adapter.
If prompted for the Windows
CD-ROM drive.
Type the following: D:\operating system name (for
example, D:\WinME).
If D is not your CD-ROM drive, substitute the correct drive
letter.
Click OK, click Finish to close the Wizard, then restart
your computer.
™
®
2000 or Windows
Installing the CATALYST™ Software
®
to search for the Standard
®
CD-ROM, insert it into your
Software Suite
®
XP, Cancel the
on page 14.