3Ware 9650SE-2LPB-10 User Manual page 79

www.3ware.com
Figure 33. 3DM Remote Monitoring and Security Configuration
Display
5 If the
3DM HTTP listening port setup
port you want to use.
This screen only appears when you check the first box on the
Remote Monitoring and Security Configuration
(You can change this setting later within 3DM.)
6 On the E-mail Notification Preferences screen (see Figure 34) use the
fields to specify initial email settings.
Note:
If you do not want email alerts to be sent to anyone, leave
"None" in these fields and click
• In the field, enter the name or IP address of your email server.
Server
You can get the IP address of your mail server by typing
<file server name>
nslookup
To find the mail server name, ask your system administrator or check
the e-mail preferences or setup options on your e-mail client.
• In the Recipients
should receive the 3DM e-mail status messages.
You may enter multiple e-mail addresses, separating each entry with a
comma (,).
• In the Sender field, enter the email address from which the email
notifications will be sent. This is typically the local host name.
(You can change these settings later within 3DM.)
screen appears, enter the HTTP
Next
to go on to the next screen.
field, enter the e-mail address of the user who
Installing 3DM
3DM
screen.
69