3Ware 9650SE-2LPB-10 User Manual page 28

Chapter 2. Getting Started with Your 3ware RAID Controller
18
Initial Settings for Policies and Background Tasks
The table below lists the default settings for policies. These settings are used
if you do not explicitly change the policy settings.
Table 6: Default Settings for Policies and Background Tasks
Policy
Controller-Level Settings
Auto-Rebuild
Auto-Carving
Auto-Detect
Carve Size or Factor
Drives Per Spinup
Delay Between Spinup
Export Unconfigured (JBOD)
Disks
Staggered Method
Staggered Spinup
Unit-Level Settings
Auto Verify
Continue on Source Error
During Rebuild
Boot Volume Size
Queuing (NCQ)
StorSave Profile
Write Cache
Background Task Settings
Verify Task Schedules
Follow Verify Task Schedule
Rebuild Task Schedules
Follow Rebuild Task
Schedule
Default Value
Enabled
Disabled
Enabled
2048 GB
1
6 seconds
Disabled
ATA-6
Enabled
Disabled
Disabled
Blank
Disabled
Protection
Enabled
starting at 12:00 am
Daily,
and running for 24 hours
No
starting at 12:00 am
Daily,
and running for 24 hours
No
3ware Serial ATA RAID Controller User Guide
Where to Change
3BM, 3DM, CLI
3BM, 3DM, CLI
CLI
3BM, 3DM, CLI
3BM, CLI
3BM, CLI
3BM, CLI
3BM
3BM
3DM, CLI
3BM, 3DM, CLI
3BM
3BM, 3DM, CLI
3BM, 3DM, CLI
3BM, 3DM, CLI
3DM, CLI
3DM, CLI
3DM, CLI
3DM, CLI