Sharp AH-X127E Service Manual page 41

CAUTION: DISCONNECT THE UNIT FROM THE POWER SUPPLY BEFORE ANY SERVICING
1. Remove one screw which is fixing the control box cover.
2. Remove the control box cover.
3. Remove two screws which are fixing right side of the
front panel.
And disconnect the wiring from the terminal board.
SERVICING PROCEDURE
FOR OUTDOOR UNIT MODEL AU-X127E AND AE-X127E
4. Remove two screws which are fixing left side of the front
panel.
5. Remove one screw which is fixing front part of the front
panel.
(BLACK COLOR)
6. Take off the three hooks of back side of the front panel.
And pull it toward you.
41
AH-X127E
AU-X127E
AY-X127E
AE-X127E