Cleaning The Door Glazing - Smeg Victoria Instructions Manual

Hide thumbs Also See for Victoria:
Table of Contents

Advertisement

3. To reassemble the door, put the hinges in
the relevant slots in the oven, making sure
that grooved sections A are resting
completely in the slots. Lower the door
and once it is in place remove the pins
from the holes in the hinges.

4.5 Cleaning the door glazing

The glass in the door should always be kept
thoroughly clean. Use absorbent kitchen
roll. In case of stubborn dirt, wash with a
damp sponge and an ordinary detergent.
Removing the internal glass panes
For easier cleaning the internal glass panes
of the door can be removed.
1. Open the door.
Cleaning and maintenance
2. Place the pins into the holes to prevent
accidental closing of the door.
3. Pull the rear part of the internal glass
pane gently upwards, following the
movement indicated by the arrows (1).
4. Extract the internal glass pane from the
front strip (2) to remove it from the door.
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tra90blp9

Table of Contents