Pyrolytic Cycle - Smeg Victoria Instructions Manual

4.3 Pyrolytic cycle

The pyrolytic function consists of an
automatic high-temperature
cleaning procedure which causes
dirt to dissolve. Thanks to this
process, it is possible to clean the
oven cavity very easily.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the oven cavity.
Preliminary operations
Before starting the pyrolytic cycle:
• Clean the internal glass panel following
the usual cleaning instructions.
• For very stubborn encrustations spray an
oven cleaning product onto the glass
(read the warnings on the product);
leave for 60 minutes, then rinse and dry
the glass using kitchen roll or a microfibre
cloth.
• Completely remove all accessories from
inside the oven.
• Remove the rack/tray support frames.
• Close the door.
Cleaning and maintenance
Pyrolytic function setting
1. Turn the function knob to the
The pyrolytic cycle minimum duration (2
hours) will appear on the display.
2. Press or to set the cleaning cycle
duration from a minimum of 120 minutes
to a maximum of 3 hours.
3. Press to confirm the start of the
cleaning cycle.
Recommended pyrolytic cycle
duration:
• Light dirt: 120 minutes.
• Medium dirt: 150 minutes.
• Heavy dirt: 180 minutes.
Setting of programmed pyrolytic cycle
The pyrolytic cycle start time can be
programmed using the programmer clock.
4. After selecting the pyrolytic cycle
duration, press
cleaning cycle will terminate will appear
on the display.
5. Press or to set the time at which
you wish to complete the pyrolytic cycle
and wait 5 seconds to confirm the set
data.
6. Two minutes after the pyrolytic cycle has
started the door is locked (the door lock
indicator light comes on) by a device
that prevents the door from being
opened.
It is not possible to select any
function once the door lock device
has been activated.
symbol:
. The time when the
31