Intended Use - Beko BEKOKAT CC-1200 Installation And Operation Manual

1.7

Intended use

The BEKOKAT ® is used to remove oil from the compressed air. The compressed air must be
free of aggressive, corrosive, caustic, toxic, flammable or oxidising substances.
Any other utilisation is thereby considered to be non-intended use.
The manufacturer shall not be liable for damage caused by improper use. All responsibility for
any other possible resulting damage will be solely borne by the owner and/or operator.
The proper and safe operation of the BEKOKAT
instructions in this manual, in particular the instructions regarding:

Location of installation/operation, installation conditions

Voltage supply and frequency

Pressure and temperature of the inlet air

Ambient temperature

Media of fluid group 2 according to DGRL 2014/68/EU free of aggressive, corrosive,
caustic, toxic, flammable and oxidising components

Surrounding area free of aggressive, corrosive, caustic, toxic, flammable or combustion
supporting materials and substances.

Connecting the alarm contacts and their signal processing.
The system is delivered as approved at the factory. The operator only has to carry out the
connections to the supply networks as described in the following chapters.
WARNING Equipment to prevent dangerous conditions
 The BEKOKAT
 All machines and plants must be designed in such a way that
V01 / 11-043
®
must not be used as the sole means of averting
dangerous conditions on machinery and equipment.
malfunctions or faulty conditions do not pose a danger to operation
personnel.
Installation and Operation Manual BEKOKAT
® includes compliance with the installation
®
19 / 88