Operation - Beko BEKOKAT CC-1200 Installation And Operation Manual

Installation and Operation Manual BEKOKAT
5.3

Operation

NOTE Safe operation
 The assembly unit must only be operated and serviced according to the
information in the operating instructions to ensure safe operation.
 In addition to these instructions, always comply with the required
statutory regulations for the application cases for system operation and
company safety regulations as well as accident prevention regulations.
 This also applies to the use of accessories and spare parts.
 Non-compliance with these installation and operating instructions can
cause hazards for people and the plant.
WARNING Operation of plant outside limit range
If the specified limits are undershot and/or exceeded, then function and
operating malfunctions could occur and cause danger for people and
material.


58 / 88
®
BEKOKAT may only be used in accordance with its intended use
and within the permitted limiting values stated on the rating plate as
well as in the technical data.
The maximum compressed air volume flow at the inlet of the
®
BEKOKAT system must not exceed 1200 m³/h (see data type plate
and technical data).
®
V01 / 11-043