Beko BEKOKAT CC-1200 Installation And Operation Manual page 51

DANGER Lack of EMERGENCY-STOP Switch
According to DIN EN 50156-1, installation of an
EMERGENCY STOP switch / EMERGENCY STOP device is required.
 It is the responsibility of the operator to install an
 Emergency shut-down devices must meet the following requirements:


V01 / 11-043
EMERGENCY STOP button.
They must be located in an easily accessible, safe place outside the
room in which BEKOKAT
marked according to the intended use.
The switch to trigger the emergency shutdown must be a red switch
on a yellow background.
Installation and Operation Manual BEKOKAT
®
is installed or along the escape route and
®
51 / 88