Beko BEKOKAT CC-1200 Installation And Operation Manual page 10

Installation and Operation Manual BEKOKAT
DANGER Compressed air! Gases under high pressure
Any contact with escaping compressed gas or not secured
system parts will create danger of serious injuries or death.
 Only
 Use only pressure-resistant installation materials and suitable tools
 Only ever use fittings and connecting elements which are approved
 Always inspect all plant parts before pressurising the system and
 Open valves slowly to prevent pressure blow outs during operation.
 The compressed air lines must be permanently installed.
 Always prevent people or objects from being affected by escaping
 Prevent vibrations, oscillations and impact from being transferred to




10 / 88
®
executeinstallation work and
depressurised status.
that are in proper working order.
for this application. Always adhere to the manufacturer's information
and instructions.
tighten them.
compressed gas.
the plant.
Perform a leakage test.
Never carry out structural modifications on the plant!
Use only original spare parts and accessories!
The general statutory safety and accident prevention regulations
apply.
maintenance work in a
V01 / 11-043