Backup Light (Station Wagon) - Subaru 2005 Legacy Owner's Manual

A) Brake/tail light
B) Rear turn signal light
C) Rear side marker light
4. Remove the bulb holder from the rear combination
light assembly by turning it counterclockwise.
5. Remove the bulb from the socket by pushing it and
turning counterclockwise. Install a new bulb.
6. Set the bulb holder into the rear combination light
assembly and turn it clockwise until it locks.
7. Close the cover and latch the lock.
8. Reinstall the rear combination light assembly and
its side cover.

! Backup light (Station wagon)

1. Use a flat-head screwdriver to remove the light cov-
er from the top of the left hand rear gate trim.
Maintenance and service
– CONTINUED –
11-79