Using A Flat-Bed Truck - Subaru 2005 Legacy Owner's Manual

Rear tie-down hooks:
The rear tie-down hooks are located near each of the
jack-up reinforcements.
Use the rear tie-down hooks only for downward
anchoring. If they are used to anchor the vehi-
cle in any other direction, cables may slip off
the hooks, possibly causing a dangerous situa-
tion.

! Using a flat-bed truck

This is the best way to transport your vehicle. Use the
following procedures to ensure safe transportation.
1. Shift the selector lever into the "P" position for au-
tomatic transmission vehicles or "1st" for manual
transmission vehicles.
2. Pull up the parking brake lever firmly.
3. Secure the vehicle onto the carrier properly with
safety chains. Each safety chain should be equally
tightened and care must be taken not to pull the chains
so tightly that the suspension bottoms out.
In case of emergency
– CONTINUED –
9-27