Seat Heater (If Equipped) - Subaru 2005 Legacy Owner's Manual

Seat, seatbelt and SRS airbags

Seat heater (if equipped)

The seat heater operates when the ignition switch is
either in the "ACC" or "ON" position.
Each seat heater has four levels of adjustment. To use
the heater in the right hand seat, turn the "R" adjust-
ment knob forward until the "
desired position. To activate the heater in the left hand
seat, turn the "L" adjustment knob forward until the
" " mark reaches the desired position. Each heater
warms the seat most quickly with the "
the adjustment knob in the furthest-forward position.
An indicator light on the adjustment knob for each seat
1-10
" mark reaches the
" mark on
heater comes on when that seat heater is activated.
When the vehicle's interior is warmed enough or be-
fore you leave the vehicle, be sure to turn the switch
off.
" There is a possibility that people with delicate
skin may suffer slight burns even at low tem-
peratures if they use the seat heater for a long
period of time. When using the heater, always
be sure to warn the persons concerned.
" Do not put anything on the seat which insu-
lates against heat, such as a blanket, cushion,
or similar items. This may cause the seat heater
to overheat.
NOTE
" Use of the seat heater for a long period of time
while the engine is not running can cause battery
discharge.
" When cleaning the seat, do not use benzine,
paint thinner, or any similar materials.