Cruise Control Set Indicator Light - Subaru 2005 Legacy Owner's Manual

Starting and operating
The light comes on when the "CRUISE" main switch is The light comes on when vehicle speed has been set.
pressed.
If you move the cruise control lever while turning the
ignition switch "ON", the cruise control function is de-
activated and the "CRUISE" indicator light flashes. To
reactivate the cruise control function, turn the ignition
switch back to the "ACC" or "LOCK" position, and then
turn it again to the "ON" position.

! Cruise control set indicator light

The cruise control set indicator light comes on when
the ignition switch is turned to the "ON" position and
goes out after about three seconds.
7-58