Subaru 2005 Legacy Owner's Manual page 88

2. Open the cover flaps to use the anchorages.
Seat, seatbelt and SRS airbags
3. Fasten the top tether hook of the child restraint sys-
tem to the appropriate upper anchorage.
4. Tighten the top tether securely.
Do not route the top tether over the head re-
straint. It may happen that the top tether cannot
be fastened tightly.
When the child restraint system is to be se-
cured using the top tether, pass the top tether
under the head restraint between the head re-
straint stay posts. If the top tether still cannot
be fastened tightly, remove the head restraint.
– CONTINUED –
1-57