Subaru 2005 Legacy Owner's Manual page 60

3. After confirming that the webbing is not twisted, in-
sert the connector (tongue) attached at the webbing
end into the buckle on the right hand side until a click
is heard.
If the belt stops before reaching the buckle, return the
belt slightly and pull it out more slowly. If the belt still
cannot be unlocked, let the belt retract slightly after
giving it a strong pull, then pull it out slowly again.
Seat, seatbelt and SRS airbags
4. After fastening the seatbelt, make sure that the
" " mark on the connector (tongue) and the "
mark on the buckle face outwards.
"
– CONTINUED –
1-29