Selection Of Manual Mode - Subaru 2005 Legacy Owner's Manual

Hide thumbs Also See for 2005 Legacy:

Table of Contents

Starting and operating

into the hole, move the selector lever to the "P" posi-

tion. If the selector lever reverse inhibiting function

fails, have the vehicle inspected by the nearest SUB-

! Selection of manual mode

With the vehicle either moving or stationary, move the

selector lever from the "D" position to the manual gate

then move it to the "+" end or "–" end of the manual

gate to select manual mode.

A) Upshift indicator

B) Downshift indicator

C) Gear position indicator

When the manual mode is selected, the gear position

indicator and upshift indicator and/or downshift indica-

tor in the tachometer come on. The gear position indi-

cator shows the currently selected gear in the 1st-to-

4th-gear range. The upshift and downshift indicators

show when a gearshift is possible. When the upshift

" is on, upshifting is possible. When the

downshift indicator "

ble. When both indicators are on, upshifting and down-

shifting are both possible. When the vehicle stops (for

example, at traffic signals), the downshift indicator

" is on, downshifting is possi-

Table of Contents