Instruments and controls
High/low beam change (dimmer)
To change from low beam to high beam, push the turn
signal lever forward. When the headlights are on high
beam, the high beam indicator light "
strument panel is also on.
To switch back to low beam, pull the lever back to the
detent position.
3-24
Headlight flasher
US3059BA
To flash the headlights, pull the lever toward you and
then release it. The high beam will stay on for as long
" on the in-
as you hold the lever. The headlight flasher works
even though the lighting switch is in the "OFF" posi-
tion.
When the headlights are on high beam, the high beam
indicator light "
comes on.
Do not hold the lever in the flashing position for
HS3026DA
" on the instrument panel also