Replacing Lost Transmitters - Subaru 2005 Forester Owner's Manual

A) Negative (–) side facing up
4. Replace with a new battery (Type CR2025 or
equivalent) making sure to install the new battery with
the negative (–) side facing up.
5. Reinstall the back half of the transmitter case by
snapping it back on.
After the battery is replaced, the transmitter must
be synchronized with the keyless entry system's
control unit. Press either the "
ton six times to synchronize the unit.
Do not let dust, oil or water get on or in the
transmitter when replacing the battery.
Be careful not to damage the printed circuit
A
board in the transmitter when replacing the bat-
tery.

Replacing lost transmitters

If you lose a transmitter or want to purchase additional
transmitters (up to four can be programmed), you
UB2210BB
should re-program all of your transmitters for security
reasons. It is recommended that you have your dealer
program all of your transmitters into your system.
Programming the transmitters
The keyless entry system is equipped with a special
code learning feature that allows you to program new
transmitter codes into the system or to delete old
ones. The system can learn up to four unique transmit-
ter codes. The four transmitter codes may be the
" or " " but-
same or different.
Keys and doors
– CONTINUED –
2-13