Subaru 2005 Forester Owner's Manual page 422

Hide thumbs Also See for 2005 Forester:

Table of Contents

7. Align the claws of the plastic support with the

grooves in the blade rubber assembly, then slide the

blade rubber assembly into place.

Securely lock the end of the plastic support as shown

in the illustration. If the rubber is not retained properly,

the wiper may scratch the rear window glass.

8. Install the wiper blade assembly to the wiper arm.

Make sure that it locks in place.

9. Lower the wiper arm.

Maintenance and service

– CONTINUED –

Chapters

Table of Contents