Subaru 2005 Forester Owner's Manual page 436

remove it from the vehicle.
HSB085BA
A) Tail/stop light
B) Rear turn signal light
C) Backup light
D) Tail/stop light
2. Remove the bulb holder from the rear combination
light assembly by turning it counterclockwise.
3. Pull the bulb from the holder. Install a new bulb.
4. Set the bulb holder into the rear combination light
assembly and turn it clockwise until it locks.
5. Reinstall the rear combination light assembly.
Maintenance and service
A
B
C
D
– CONTINUED –
HSB086BC
11-71