Subaru 2005 Forester Owner's Manual page 232

2. Press the eject button (4). The selected disc will be
ejected and the indicator light will begin blinking.
3. To remove another disc, repeat Steps 1 and 2
choosing a different "Disc select" button.
(To remove discs when the ignition switch is in the
"Lock" position, press the eject button, and the first
disc will be ejected. Press the eject button again, and
the next disc will be ejected and so on. At this time, the
disc select buttons are disabled.)
To remove all discs at one time
1. Press and hold the eject button (4) until all "Disc" in-
dicators begin blinking (about 1.5 seconds), and the
first disc will be ejected.
2. When the disc is removed, the next one will be
ejected, and so on.
To replace a playing disc with another
Simply press the desired one of disc select buttons (3)
(numbered from 1 to 6) or press the disc select button
on the radio unit to select the desired disc, and the disc
will begin to play.
Disc indicators
Lit: when the corresponding storage tray is occupied
by a disc.
Blinking: Disc player is either in loading, eject or
changing mode.
OFF: No disc is loaded or the ignition switch is in the
"LOCK" position.
Open/Closed disc slot indicator
When the disc slot is open, the disc indicators on both
sides of the slot illuminate.
Function control
Refer to CD changer control operating instructions de-
scribed in the "Type A audio set (if equipped)" section.
Audio
– CONTINUED –
5-29