Security Indicator Light; Key Replacement - Subaru 2005 Forester Owner's Manual

Hide thumbs Also See for 2005 Forester:
Table of Contents

Advertisement

Security indicator light

The security indicator light deters potential thieves by
indicating that the vehicle is equipped with an immobi-
lizer system. It begins flashing about 60 seconds after
the ignition switch is turned from the "ON" position to
the "ACC" or "LOCK" position or immediately after the
key is pulled out.
If the security indicator light does not flash, the immo-
bilizer system may be faulty. If this occurs, contact
your SUBARU dealer as soon as possible.
In case an unauthorized key is used (e.g. an imitation
key), the security indicator light comes on.
NOTE
Even if the security indicator light flashes irregu-
larly or its fuse blows (the light does not flash if its
fuse is blown), the immobilizer system will func-
tion normally.

Key replacement

Your key number plate and security ID plate will be re-
quired if you ever need a replacement key made. Any
new key must be registered for use with your vehicle's
immobilizer system before it can be used. Up to four
keys can be registered for use with one vehicle.
For security, all the keys registered with your vehicle's
immobilizer system will have their ID codes erased
and re-registered when a new key is made. Therefore,
all of your vehicle's keys must be presented when a
new key is registered. Any key that is not re-registered
when a new key is made cannot be used after the oth-
er keys are re-registered. For information on replace-
ment keys and on the registration of keys with your im-
mobilizer system, contact your SUBARU dealer.
Keys and doors
– CONTINUED –
2-5

Advertisement

Table of Contents
loading

Table of Contents