System Configuration Process Overview; Configuration Notes - Nokia 7210 Configuration Manual

System Management

6.9 System Configuration Process Overview

Figure 35
Figure 35

6.10 Configuration Notes

This section describes system configuration caveats.
To access the CLI, ensure that the 7210 SAS device is properly initialized and the
boot loader and BOFs have successfully executed.
318
- when the card/IMM is provisioned and equipped, but there is a mismatch
between the two
• Upon provisioning the card, subsequent to attaching a new system-resource
policy, the parameters specified in the policy are used (including any boot-time
parameters).
• If the card is provisioned and equipped, and any boot-time parameter is changed
in the system-resource policy, the user must issue the card reset command for
all cards that are using the policy or reboot the chassis, for the policy change to
take effect.
shows the process to provision basic system parameters.
System Configuration and Implementation Flow
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Start
Configure System Information
Configure Time Parameters
End
© 2021 Nokia.
Configuration Guide
sw0685
3HE 17358 AAAB TQZZA