1830 Vwm Led Functionality - Nokia 7210 Configuration Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Note: The 1830 VWM allows for a mix of passive DWDM and active DWDM devices in a
stacked configuration; the configuration is supported on all 7210 SAS platforms.
6.6.3.1
Table 39
Table 39
3HE 17358 AAAB TQZZA
• The number of DWDM or CWDM devices that are supported in a stacked
configuration managed by the 7210 SAS is limited. Please contact your Nokia
representative for information about the number of units supported.
• In a stacked or cascaded configuration, all 1830 VWM units connected to the
7210 SAS must be of a similar type, either ec-cw or ec-dw/ec-dwa. A mix of
CWDM and DWDM types is not supported.

1830 VWM LED Functionality

and Table 40
LED Functionality for 7210 SAS and 1830 VWM (CWDM)
Events
Shelf admin up and shelf
is physically connected to
7210 SAS
The shelf becomes
operational up by default
Shelf is operationally up
Line card admin up and
operational down when
card-type not provisioned
correctly (that is,
mismatch between
provisioned and equipped
type)
Line card admin up and
operational up when card-
type correctly provisioned
Line card removed
Use subject to Terms available at: www.nokia.com
describe the LED functionality of the device.
7210 SAS Optical shelf
major alarm controller LED
LED
No color Green
No color Green
Red Green
No color Green
Amber LED Green
glows
© 2021 Nokia.
System Management
Optical shelf line
card LED
Amber/green based
on whether line card
provisioned correctly
or not
Amber/green based
on whether card-type
provisioned correctly
or not
Amber for that line
card LED
Green for that line
card LED
No LED glows (line
card is removed)
309