Modifying And Saving A Configuration - Nokia 7210 Configuration Manual

Boot Options
...
#--------------------------------------------------
# Finished FRI Nov 21 15:06:16 2008 UTC
A:*A:sim169##
4.11.1.2
If you modify a configuration file, the changes remain in effect only during the current
power cycle unless a save command is executed. Changes are lost if the system is
powered down or the router is rebooted without saving.
Use the following command syntax to save a configuration.
CLI Syntax:
180
name "7210-3"
contact "Fred Information Technology"
location "Bldg.1-floor 2-Room 201"
clli-code "abcdefg1234"
coordinates "N 45 58 23, W 34 56 12"
ccm 1
exit
snmp
exit
login-control
idle-timeout 1440
motd text "7210-3"
exit
time
sntp
shutdown
exit
zone UTC
exit
thresholds
rmon
exit
exit
exit...

Modifying and Saving a Configuration

• Specify the file URL location to save the running configuration. If a destination is
not specified, the files are saved to the location where the files were found for
that boot sequence. The same configuration can be saved with different
filenames to the same location or to different locations.
• The detail option adds the default parameters to the saved configuration.
• The index option forces a save of the index file.
• Changing the active and standby addresses without reboot standby CPM may
cause a boot-env synchronization to fail.
bof# save [cflash-id]
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA