Configuring A System Resource Profile For A Vc - Nokia 7210 Configuration Manual

Virtual Chassis
5.5 Configuring a System Resource Profile for a
A node system resource profile is divided into two parts:
The per card/slot resource profile is useful for allocating resources to different
features on each card to suit the application or service being delivered on those
access ports.
The following output is an example of the per-node global system resource profile for
a VC.
A:Dut-A# configure system global-res-profile
A:Dut-A>config>system>glob-res# info detail
----------------------------------------------
----------------------------------------------
A:Dut-A>config>system>glob-res#
The following output shows an example of the per-card/slot resource profile for a VC.
*A:Dut-A# configure system resource-profile 1
*A:Dut-A>config>system>res-prof# info detail
----------------------------------------------
234
VC
• a global resource profile to manage the VC-wide resources for certain features
• a resource profile per card/slot to manage the resources on a specific slot
router
no ecmp
no ldp-ecmp
no max-ip-subnets
no max-ipv6-routes
exit
description "Default System Resource Profile Policy"
no g8032-control-sap-tags
ingress-internal-tcam
sap-aggregate-meter 2
qos-sap-ingress-resource 4
mac-match-enable 6
ipv4-match-enable 6
ipv6-ipv4-match-enable 6
ipv4-mac-match-enable 6
exit
acl-sap-ingress 2
ipv4-match-enable 5
ipv6-64-only-match-enable 5
ipv4-ipv6-128-match-enable 5
mac-match-enable 5
exit
eth-cfm 2
no up-mep
sap-down-mep 1
sdp-down-mep-ing-mip 1
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA