Nokia 7210 Configuration Manual page 511

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Context config>port>ethernet>lldp>dstmac
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command enables LLDP notifications.
The no form of this command disables LLDP notifications.
tx-mgmt-address
Syntax tx-mgmt-address [system]
no tx-mgmt-address
Context config>port>ethernet>lldp>dstmac
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command specifies which management address to transmit.
The no form of this command reverts value to the default.
Default no tx-mgmt-address
Parameters system — Specifies to use the system IP address. If this parameter is specified, the
tx-tlvs
Syntax tx-tlvs [port-desc] [sys-name] [sys-desc] [sys-cap]
no tx-tlvs
Context config>port>ethernet>lldp>dstmac
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command specifies which LLDP TLVs to transmit.
The no form of this command reverts to the default.
Default no tx-tlvs
Parameters port-desc — Specifies that the LLDP agent should transmit port description TLVs.
sys-name — Specifies that the LLDP agent should transmit system name TLVs.
sys-desc — Specifies that the LLDP agent should transmit system description TLVs.
3HE 17358 AAAB TQZZA
system address will only be transmitted once it has been configured.
Use subject to Terms available at: www.nokia.com
© 2021 Nokia.
System Management
511