2.4.1 Enclosure VPD label and Location Code
The enclosure VPD label is placed on the rear of a Disk Enclosure just above the enclosure LEDs as shown in
Figure 4.
2.5 Concurrency
The DE Rails are NOT concurrently maintainable. This procedure requires the customer to stop all client
applications and shut down the file system.
2.6 DE Rail Weight
Each DE Rail assembly weighs about 5 lbs (2.3 kg)
2.7 Required SSRs and Roles
This service procedure requires two SSRs.
This service procedure contains steps to be performed by a customer system administrator and two IBM SSRs (System
Service Representatives).
The customer system administrator performs the STEPs in Sections marked with "<= CUSTOMER TASK"
•
The SSR performs the STEPs in Sections marked with "<= SSR TASK"
•
Power775 Disk Enclosure Rail Service Procedure
Figure 4: DE Enclosure VPD Label Location
12 of 57