Heartway Medical Products S19F User Manual page 18

19. Operating in rain, snow, salt, mist conditions and on icy or slippery surfaces
may have an adverse affect on the electrical system.
20. Never sit on your scooter when it is being used in connection with any type of
lift or elevation product. Your scooter is not designed with such use in mind and
any damage or injury incurred from such use is not the responsibility of
Heartway.
21. Surfaces of the power scooter that can come into direct contact with the
occupant's skin and/or assistant's skin during normal use and that are within
occupant reach shall not exceed 105.8 °F(41 °C). The motor surface can reach
temperatures greater than 105.8 °F(41 °C) after driving. Do not touch these
parts when disassembling the scooter or wait until the motor is cooled down.
22. The programming of the controller shall only be carried out by personnel, which
is authorized by his manufacturer. A wrong programming can result in safety
hazards for the occupant!
23. Drive-wheel needs to be switched to engaged-mode while transporting the
power scooter with a car or airplane.
24. Surface temperatures can increase when exposed to external sources of heat.
IMPORTANT NOTICE
Heartway Medical Product has designed and engineered power scooter to provide
maximum utility. However, under no circumstances should you modify, add, remove,
or disable any part or function of your power scooter. Personal injury and damage to
the power scooter may result.
1. Do not modify your power scooter in any way not authorized by Heartway. Do
not use accessories if they have not been tested or approved for Heartway
products. Changing of controller parameter shall be only performed by
authorized technicians due to the safety concern.
2. Get to know the feel of your power scooter and its capabilities. Heartway
recommends that you perform a safety check before each use to make sure
your power scooter operates safely.
Inspections prior to using your power scooter:
1. If equipped with pneumatic tires, please check for proper tire inflations.
2. Please check all electrical connections and make sure they are tight and not
corroded.
3. Please check all harness connections and make sure they are secured properly.
4. Please check the brakes.
16