Supermicro SuperServer 420GP-TNAR User Manual page 34

3. Locate the lever on the carrier and press it down as shown below.
4. Using pin 1 as a guide, carefully align the CPU keys on the processor (A & B) with
those on the carrier (a & b) as shown below.
5. Once aligned, carefully place one end of the processor under latch 1 on the carrier, and
then press the other end down until it snaps into latch 2.
6. After the processor is placed inside the carrier, examine the four sides of the processor,
making sure that the processor is properly seated on the carrier.
Processor Carrier Assembly
(Top Side View)
Chapter 3: Maintenance and Component Installation
B
CPU Key (on the
processor)
CPU Key (on
b
the carrier)
2
Latch
34
Latch
1
A
CPU Key (on the
processor)
a
CPU Key (on the
carrier)
Processor Carrier Assembly
Lever