Table of Contents
Advertisement
VIVOTEK
© 2019 VIVOTEK INC. All Right Reserved
http://myserver/cgi-bin/admin/optimizedir.cgi?function=getstatus
Response:
HTTP/1.0 200 OK\r\n
Cache-control: no-cache\r\n
Pragma: no-cache\r\n
\r\n
"optimizedir_c0_irmode='auto'"
"optimizedir_c0_irnum='5'"
"optimizedir_c0_irstrength='1,97,100,100,100'"
"optimizedir_c0_irstatus='normal'"
(for control API)
Syntax:
錯誤! 超連結參照不正確。?channel=<value>&operation=<value>&irmode=manual
[&strength=<value>] – Set IR strength
PARAMETER
channel
operation
irmode
strength
Example:
http://myserver/cgi-bin/admin/optimizedir.cgi?channel=0&operation=set&irmode=manual&
strength=50,70,50,50,50
Response:
HTTP/1.0 200 OK\r\n
Cache-control: no-cache\r\n
Pragma: no-cache\r\n
\r\n
"optimizedir_c0_irstrength='50,70,50,50,50'"
"optimizedir_c0_irmode='manual'"
412 - User's Manual
VALUE
0~"capability_nvideoin"-1 Channel of the video source.
set,
settoall
auto,
manual
1~100
DESCRIPTION
"set": set the strength of each IR LED separately
"settoall": use fixed strength for all IR LED
Irmode needs to be set as manual for adjusting IR
LED strength.
If the operation is set as "set", the number of
strength values need to be the same as it of
irnum. However, it needs only one value for
strength when the operation is set as "settoall".
270
Advertisement
Table of Contents
