Table of Contents
Advertisement
© 2019 VIVOTEK INC. All Right Reserved
NAME
isptz
preset_i<0~(k-1)>_name string[40]
preset_i<0~(k-1)>_zoom capability_ptz_
preset_i<0~(k-1)>_focus
preset_i<0~(k-1)>_
dwelling
preset_i<0~(k-1)>_focus
setting
patrolseq
patroldwelling
disablemdonptz
VALUE
SECURITY
(get/set)
rt"-1
0 ~ 2
1/4
1/4
1/4
c<0~(n-1)>_min
zoom ~
capability_ptz_
c<0~(n-1)>_ma
xzoom
capability_ptz_
1/4
c<0~(n-1)>_min
focus ~
capability_ptz_
c<0~(n-1)>_ma
xfocus
0 ~ 999
1/4
sync,
1/4
fixcurrent
string[120]
1/4
string[160]
1/4
<boolean>
1/4
DESCRIPTION
0: disable PTZ commands.
1: enable PTZ commands with PTZ
driver.
2: enable PTZ commands with UART
tunnel.
* Only available when bit7 of
capability_ptzenabled is 1
Name of the preset location.
Zoom position at each preset location.
Focus position at each preset location.
The dwelling time of each preset
location
The focus mode of each preset, which is
essential and should be grouped with
"preset_i<0~(k-1)>_name."
* We support this parameter when the
version number (httpversion) is equal
or greater than 0305b.
(For external device)
The indexes of patrol points, separated
by ","
(For external device)
The dwelling time of each patrol point,
separated by ","
Disable motion detection on PTZ
VIVOTEK
209
User's Manual - 351
Advertisement
Table of Contents
