Table of Contents
Advertisement
VIVOTEK
© 2019 VIVOTEK INC. All Right Reserved
PARAMETER
trigger
triggerstatus
di
mdwin
mdwin0
326 - User's Manual
VALUE
SECURITY
(get/set)
boot,
6/6
di,
pir,
motion,
seq,
recnotify,
tampering,
vi,
volalarm,
visignal,
vadp,
smartsd
<product
dependent>
string[40]
6/6
0,<positive
6/6
integer>
0,<positive
6/6
integer>
0,<positive
6/6
integer>
DESCRIPTION
Indicate the trigger condition:
"boot" = System boot.
"di"= Digital input.
"pir"= PIR detection.
"motion" = Video motion detection.
"seq" = Periodic condition.
"visignal" = Video input signal loss.
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi"= Virtual input (Manual trigger).
"volalarm"= Audio detection.
"smartsd"= Lifetime detection of SD card.
"shockalarm" = Shock detection.
"virestore" = Video input signal restore.
"vadp" = VADP trigger.
* "smartsd" is only valid when smart SD
card is inserted
The status for event trigger
Indicate the source id of di trigger.
This field is required when trigger
condition is "di".
One bit represents one digital input. The
LSB indicates DI 0.
* Only available when "capability_ndi" >
0
Indicate the source window id of motion
detection.
This field is required when trigger
condition is "md".
One bit represents one window.
st
The LSB indicates the 1
For example, to detect the 1
windows, set mdwin as 5.
Similar to mdwin. The parameter takes
effect when profile 1 of motion detection
is enabled.
window.
st
rd
and 3
184
Advertisement
Table of Contents
