Table of Contents
Advertisement
VIVOTEK
■ Camera tampering detection
This option allows the Network Camera to trigger when the camera detects that is is being tampered
with. To enable this function, you need to configure the Tampering Detection option first. Please refer
to page 148 for detailed information.
■ Manual Triggers
This option allows users to enable event triggers manually by clicking the on/off button on the
homepage. Please configure 1 to 3 associated events before using this function.
■ Shock detection
A shock accelerometer comes with the camera. If impact to the camera occurs, such as someone tries
to destroy the camera, the impact can be detected and reported. The Shock detection configuration is
found in Configuration > Applications > Shock detection.
■ VADP
It is presumed that you already uploaded and enabled the VADP modules before you can associatee
VADP triggers with an Event setting.
Click on the Set VADP Trigger button to open the VADP setup menu. The triggering conditions
available with 3rd-party software modules known as VADP will be listed. Use the arrow buttons to
select these triggers. Users may implant these modules for different purposes such as triggering
motion detection, or applications related to video analysis, etc. Please refer to page 152 for the
configuration options with VADP modules.
134 - User's Manual
Advertisement
Table of Contents
