Vivotek 9189 Series User Manual page 405

© 2019 VIVOTEK INC. All Right Reserved
8.32 Connect to AP
Note: This request requires Administrator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/connect_ap.cgi
PARAMETER VALUE
N/A N/A
8.33 Get Wireless Information
0)
Note: This request requires Administrator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/getwirelessinfo.cgi
PARAMETER VALUE
N/A N/A
8.34 Get Wireless Signal Strength
> 0)
Note: This request requires Administrator privileges.
(capability_network_wireless > 0)
DESCRIPTION
Apply the wireless settings and connect to AP.
(capability_network_wireless >
DESCRIPTION
Get wireless information. Camera will return following
information.
1. Wireless channel
2. Link quality
3. Signal level
4. Noise level
5. SNR
6. TX Rate
7. RX Rate
(capability_network_wireless
VIVOTEK
263
User's Manual - 405