Vivotek 9189 Series User Manual page 359

© 2019 VIVOTEK INC. All Right Reserved
NAME
stopbit
uartmode
7.45 Lens Configuration
Group: lens for n channel products
n denotes the value of "capability_nvideoin"
(capability_image_c<0~(n-1)>_lensconfiguration_support = 1)
NAME
selected
Group: lens_default
NAME
totalnumbers
Group: lens_user
NAME
totalnumbers
VALUE SECURITY
(get/set)
1,2 4/4
rs485 4/7
VALUE SECURITY
(get/set)
<string> 6/7
VALUE SECURITY
(get/set)
0,<positive 6/7
integer>
VALUE SECURITY
(get/set)
0,<positive 6/7
integer>
DESCRIPTION
"1": One stop bit is transmitted to
indicate the end of a byte.
"2": Two stop bits are transmitted to
indicate the end of a byte.
If you want to transfer the stopbit for
150% of the normal time used to
transfer one bit, the
uart_i<0~(n-1)>_stopbit should be set
as 2 and the uart_i<0~(n-1)>_databit
set as 5 as well.
RS485 mode.
DESCRIPTION
Current selected lens profile.
e.g. lens_selected=lens_default_i0, it
means choosen lens configuration is i0
lens of default group.
DESCRIPTION
Totoal support number of the default
lens profiles
DESCRIPTION
Totoal support number of the user lens
profiles
VIVOTEK
217
User's Manual - 359