Vivotek 9189 Series User Manual page 350

VIVOTEK
© 2019 VIVOTEK INC. All Right Reserved
7.41 Camera PTZ Control (IZ Series)
Group: camctrl_c<0~(n-1)> for n channel products
capability_camctrl_c0_buildinpt = 0)
n denotes the value of "capability_nvideoin" and k denotes the value of "capability_npreset"
NAME
ccdtype
motortype
cameraid
panspeed
tiltspeed
zoomspeed
autospeed
focusspeed
focusmode
uart
350 - User's Manual
(capability_camctrl_c0_zoommodule = 1 and
VALUE SECURITY
(get/set)
string[16] 6/7
string[16] 6/7
0 ~ 255 1/4
-5 ~ 5 1/4
-5 ~ 5 1/4
-5 ~ 5 1/4
-5 ~ 5 1/4
-5 ~ 5 1/4
auto,onetimeau 1/4
to,spotlight,ma
nual
* Available
values are
listed in
"capability_cam
ctrl_c<0~(n-1)>
_focusmode"
0 ~ 1/4
"capability_nua
DESCRIPTION
(Internal used, read only)
(Internal used, read only)
Camera ID controlling external PTZ
camera.
Note:
Please set your speed dome to the
appropriate baud rate, and Camera ID,
e.g. 2400bps, camera ID 1,2,3,,,,etc.
All Camera IDs on the same controlling
system (NVR or rs485 keyboard) have to
be distinct.
Therefore, once you send a controlling
signal, each camera will only accept the
inputs with the corresponding ID.
Pan speed
Tilt speed
Zoom speed
Auto pan speed
Auto focus speed
Indicate the focus control mode.
Select corresponding uart
(capability_nuart>0).
208