Vivotek 9189 Series User Manual page 400

VIVOTEK
© 2019 VIVOTEK INC. All Right Reserved
PARAMETER VALUE
getpanangle <integer>
gettilt 0, <positive integer> Get the current tilt position.
gettiltangle <integer>
getzoom 0, <positive integer> Get the current zoom position.
getratio <decimal>
getfocus 0, <positive integer> Get the current focus position.
getminspeedlv 0, <positive integer> Get the minimum speed level of the PTZ control. Normally,
getmaxptspeedlv 0, <positive integer> Get the maximum speed level of pan/tilt moving.
getmaxzspeedlv 0, <positive integer> Get the maximum speed level of zoom moving.
getmaxfspeedlv 0, <positive integer> Get the maximum speed level of focus moving.
getminpan 0, <positive integer> Get the lower limit for pan position.
getmaxpan 0, <positive integer> Get the upper limit for pan position.
getminpanangle <integer>
getmaxpanangle <integer>
getmintilt 0, <positive integer> Get the lower limit for tilt position.
getmaxtilt 0, <positive integer> Get the upper limit for tilt position.
400 - User's Manual
DESCRIPTION
Get the current pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the current tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the current zoom ratio.
the speed level is '0,' which denotes halting a continuous
movement.
*Only available when
"capability_camctrl_c<0~(n-1)>_buildinpt" > 0
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the lower limit for pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the upper limit for pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
*Only available when bit1 of
258