Table of Contents
Advertisement
VIVOTEK
© 2019 VIVOTEK INC. All Right Reserved
8.26 Fisheye Local Dewarp Camera Control
0 and capability_fisheyelocaldewarp.c0 > 0, only support in 1R
mode)
Note: This request requires camctrl privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/camctrl/fdCamCtrl.cgi?channel=<value>&stream=<value>
[&move=<value>]
– Move home, up, down, left, right
[&zoom=<value>]
– Zoom wide, tele
[[&speedpan=<value>][&speedtilt=<value>][&speedzoom=<value>]]
[&zooming=<value>&zs=<value>]
[&vx=<value>&vy=<value>&vs=<value>]
[&x=<value>&y=<value>&videosize=<value>&resolution=<value>&stretch=<value>]
image (Move the center of image to the coordination (x,y) based on resolution or videosize of 1O
mode.)
[&return=<return page>]
Example:
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&move=right
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&zoom=tele
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&move=top&speedtilt=-1
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&zooming=tele&zs=2
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&vx=5&vy=3&vs=2
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&x=700&y=700&videosize=19
20x1920&resolution=1920x1920&stretch=1
PARAMETER
VALUE
channel
<0~(n-1)>
stream
<0~(m-1)>
move
home
up
down
394 - User's Manual
– Zoom without stopping, used for joystick
– Shift without stopping, used for joystick
DESCRIPTION
Channel of video source.
Stream.
Move to home position.
Move up.
Move down.
(capability_fisheye >
– Set speeds
– Click on
252
Advertisement
Table of Contents
