Lexmark CS417 User Manual page 86

Understanding the printer menus
Use
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Error Recovery
Max Auto Reboots
1–20
Print Recovery
Auto Continue
Disabled
5–255
Print Recovery
Jam Recovery
On
Off
Auto
Print Recovery
Page Protect
Off
On
Accessibility
Prolong Screen Timeout
On
Off
Press Sleep Button
Do Nothing
Sleep
Hibernate
To
Set the printer to restart when an error occurs.
Note: Reboot always is the factory default setting.
Determine the number of automatic reboots the printer can
perform.
Notes:
•
2 is the factory default setting.
•
If the printer reaches the maximum number of reboots
within a certain amount of time, the printer does not
continue to reboot, and the error message appears on
the display.
Let the printer automatically continue printing from certain
offline situations when these are not resolved within the
specified time period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Notes:
•
Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
•
On sets the printer to always reprint jammed pages.
•
Off sets the printer to never reprint jammed pages.
Successfully print a page that may not have printed otherwise.
Notes:
•
Off is the factory default setting. This prints a partial
page when there is not enough memory to print the
whole page.
•
On sets the printer to process the whole page so that
the entire page prints.
Set the printer to continue a specified job without returning to
the home screen when the screen timeout timer expires.
Note: Off is the factory default setting.
Determine how the printer, while in idle state, reacts to a short
press of the Sleep button.
Note: Sleep is the factory default setting.
86