Usb / Ethernet Port Locations On Your Brother Machine - Brother MFC-J4340DW Online User's Manual

Hide thumbs Also See for MFC-J4340DW:
Table of Contents

Advertisement

Home >
Introduction to Your Machine

USB / Ethernet Port Locations on Your Brother Machine

The USB and Ethernet ports are located inside the machine (Ethernet ports are available only for certain
models).
To install the driver and software necessary to use your machine, go to your model's Downloads page at
support.brother.com.
1. Place both hands under the plastic tabs on both sides of the machine to lift the scanner cover (1) into the
open position.
2. Locate the correct port (based on the cable you are using) inside the machine as shown.
Carefully guide the cable through the cable channel and out the back of the machine.
3. Gently close the scanner cover using both hands.
Related Information
Introduction to Your Machine
> USB / Ethernet Port Locations on Your Brother Machine
1
26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j4440dwMfc-j4540dw

Table of Contents