Table of Contents
Advertisement
Home >
Security
>
Use IPsec
Configure an IPsec Template Using Web Based Management
Related Models: MFC-J4440DW/MFC-J4540DW
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If required, type the password in the Login field, and then click Login.
The default password to manage this machine's settings is located on the back of the machine and marked
"Pwd".
4. Go to the navigation menu, and then click Network > Security > IPsec Template.
Start from
, if the navigation menu is not shown on the left side of the screen.
5. Click the Delete button to delete an IPsec Template. When an IPsec Template is in use, it cannot be
deleted.
6. Click IPsec Template that you want to create. The IPsec Template screen appears. The configuration fields
differ based on the Use Prefixed Template and Internet Key Exchange (IKE) you select.
7. In the Template Name field, type a name for the template (up to 16 characters).
8. If you selected Custom in the Use Prefixed Template drop-down list, select the Internet Key Exchange
(IKE) options, and then change the settings if needed.
9. Click Submit.
Related Information
•
Use IPsec
•
IKEv1 Settings for an IPsec Template
•
IKEv2 Settings for an IPsec Template
•
Manual Settings for an IPsec Template
Related Topics:
•
Access Web Based Management
> Configure an IPsec Template Using Web Based Management
360
Advertisement
Table of Contents
