Brother MFC-J4340DW Online User's Manual page 110

Option
Document Size
Brightness
Contrast
Auto Deskew
Skip Blank Page
Remove Background Change the amount of background colour that is removed.
10. Press Mono Start or Colour Start.
[Colour Setting] depends on the settings you have selected. Pressing Mono Start or Colour Start
does not allow you to change the settings.
MFC-J4440DW/MFC-J4540DW
1. Load your document.
2. Press [Scan] > [to PC] > [to Image].
3. If the machine is connected over the network, press a or b to display the computer where you want to send
data, and then select the computer name.
If the LCD message prompts you to enter a password, use the LCD to enter the password for the computer,
and then press [OK].
4. Do one of the following:
• To change the settings, press
• Press [Start] to start scanning without changing additional settings.
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to
complete the scanning job.
To use [Options], you must connect a computer with Brother iPrint&Scan installed to the machine.
5. Press [Scan Settings] > [Set at Device].
6. Select the scan settings you want to change, and then press [OK].
Option
Colour Setting
Resolution
File Type
Document Size
Brightness
Contrast
Auto Deskew
Skip Blank Page
Remove Background Colour Change the amount of background colour that is removed.
Description
Select your document size.
Select the brightness level.
Select the contrast level.
Correct any skewed documents when they are scanned.
When On is selected, blank pages are skipped.
[Options].
Description
Select the colour format for your document.
Select the scan resolution for your document.
Select the file format for your document.
Select your document size.
Select the brightness level.
Select the contrast level.
Correct any skewed documents when they are scanned.
When On is selected, blank pages are skipped.
103